Argos NERF "dart chart" for download!

hey, guys MMU9 here, i was just browsing the net when i came across this, its a "dart chart" and it shows which kind of darts go in which blasters. i know we all know that already but i thought it was quite cool so i decided to share it with you:

http://www.argos.co.uk/wcsstore/argos/en_GB/pdf/A3_Dart_TagV5_Argos%2023-11-11.pdf

this chart is free to download from the argos website so check it out and have a nice day! unicorn out.

The Safean; A New Form of Stefan

Hey guys it's TheRoboteer here. Sorry for my lack of posts recently. I went back to school this week and i've been tied up in homework and such. Anyway, onto what this post is actually about. This week I was trying to devise a type of stefan that would equal the range of a regular stefan whilst being as safe as a stock dart.I did this by using no metallic or hard substances to weight the dart. I also used the head off a stock dart to act as cushioning for the projectile.


This is what I came up with.

As you can see it uses the head of a streamline to cushion the impact of the dart. The main body of the dart is a whistler (that's what that black disc is.) The only weight I used in this was a section of pencil eraser refill. In the back of the dart I also did what i consider to be a superior version of Drac's straw mod where, in the place of the straw I used a piece of vinyl tubing. Overall I think that I accomplished my goals as I shot myself in the arm with this stefan (fired from me Element.) and it stung for less than 5 seconds and did not leave a bruise or welt. It also only fires 5 feet less than a regular glue dome stefan weighted with 2 plastic BB's.

vidoc 1 (GLENUNGA HIGHSCHOOL)

yes i know this is a little late but uploading problems enjoy

What you should bring to a nerf war

1: safety glasses
(hot glued tips + eyes = Blindness)
2: lunch
(while your nerfing you get hungry)
3:water
(no taste and healthy)
4: 4 nerf blasters
( if you break your nerf blaster switch it out)
5: finally signed nerf darts
(make sure you sign your darts or you will lose them)

Found: nerf dart tag sharp shots(australia)

Hey guys hunter here today while looking around in target i found an awesome blaster.
The sharp shot

The blaster is available in target


If you didnt know australia always get things late. Anyway i didnt buy a sharpshot because im not intrested in buying it yet. I have to much secondarys (i broke 2 of my
Primarys so im couplering a tripleshot)

Anyway thats my post
As always thanks for reading

hey guys, MMU9 here and today i'm showing you the blaster BBV made for me during our mod exchange...IN VIDEO FORM O___O *mind blown!* enjoy! unicorn out.

Blaster of the Week

                                                         Blaster of the Week

Hey guys it's Longshot_bro and I thought of doing something called Blaster of the Week. Its when I choose my favorite foam blaster. This weeks one I chose is the hasbro Star Wars Rebel Blaster. The reason I chose this is because A it's a lot the like the NF which I really like and B the darts are so cool. I am not going to go really into the features of the blaster but if you want to see that check out my channel at www.youtube.com/kingzamods .

Longshot_bro

So guys I'm sorry about the last part in my post and I don't know why you guys couldn't see it, but this is what I said. So I think thats it for now but I will make a video on all of these blasters once I finish them.

Longshot_bro

    Hey guys Longshot_bro here and I'm sorry I haven't posted anything in a while thats just because I've had a lot of school work but now it's SPRING BREAK! So I will post a lot more hopefully! So I don't have a video or anything but I thought I'd just bore you with words.

    

                                      Clear Nerf Nite Finder EX-3 Mod

    So I've been thinking up a mod for the Nerf Nite Finder. My idea is to take out the AR, increase the seal (don't know if I spelled that right), by adding another O-ring, then I will add a Buzzbee Rapid Fire Tek spring, and doing a cpvc coupler mod. I think that's it for now but I might to an LED mod because I really like how lights look on clear blasters.

                                           Nerf Big Bad Bow Mod

    So another idea i've been thinking to do over spring break is a BBB mod. I don't know much about the blaster but I'm going to take out the AR, mod it to shoot darts, might add another spring if I can ( again I don't know much about the blaster). So I think that's all the internal mods I am going to do but im still thinking over a paint job.

                                              Nerf Maverick Mod

    I know this has been a lot of blasters but I have one more. So my friend "commissioned" me to mod his  Nerf Maverick. What I'm going to do is all the basic stuff like full barrel drop, AR removel, pennies in the spring and I think thats it. He also asked me to do a blue paint job all over but cover the handle and keep the barrel and priming mech black. Also he wants me to detail on the number 13 in roman numerals (XIII) (detailed on the priming mech, and where the maverick detailing used to be)

Sorry about this small faint font but I got stuck in it. (sorry). So thats it for now but I'll show you what all these mods look like when there done.


Longshot_bro 

    

Nerf Rampage

Ok I know this is old news but I'm bored so i decided to torture you with pure text.
But first to make this more dramatic
Watch This Clip

Ok the Rampage as we all know is a Raider on steroids.
I have seen some comments saying ' Y U NO HAVE 35 DRUM '.

 Ok I think the reason is because when your in a Nerf war the 35 dart drum is heavy, bulky and slows you down also it is lopsided but the 20 dart drum is lighter, well balanced and you can run with out becoming tired. The colour is a darker blue than the Nerf Raider and also has silver and black detailing on the shell. The internals might not have any AR's and it might have a strong spring but if there is an AR when you modify the blaster the back of the plunger wont smack
  (If you modify a nerf recon without padding it then you will know what i mean.)
Ok so I'm wrapping up this post so good night everybody.

My Big Blast

Hey guys it's TheRoboteer here.  This post is about my Buzz Bee Big Blast (or 4b as they are known on the NIC). I hear that they are pretty hard to get now, so I was lucky. I got mine in a twin pack from TKmaxx in 2010.

Anyway. Let's move on to the mods.

 The most noticiable thing is the giant longstrike (or LSk) barrel poking out the front

The barrel. It's 1 foot long and is made from 15mm PEX tube

A test firing. I plugged the pump aswell. This was shot before the addition of the longstrike barrel

Thanks for reading guys. This is TheRoboteer,signing off

Nerf Longshot Modification Stage 1

Hey guys. TheRoboteer here. This is the first stage of my longshot mod. It's going to have a minimization, AR removeal and have a spring addition.I may even add a toy chainsaw to the bottom to make it into a GoW Lancer.

Here's the first shot. It's a pretty clean cut. I sanded it with two different grits of sandpaper(80 grit and an extremely fine grit)

An overall shot of the blaster. That cut is perfectly straight.

A look at the underside of the blaster

This is only the first part. Part 2 will be a range test video after the removal of the AR's and Part 3 will will be a range test after the spring addition.

minimized & couplered nitefinder for BBV

you may remember when BBV posted some photos and stuff of the maverick he made for the mod exchange i am doing with him. i decided that i would post my half of the exchange for you all to see aswell.

a shot of the internals, including coupler epoxy'd into the plunger tube

pvc taped and re-greased the plunger head

one side

the other side

one side of the speedloader

the other side of the speedloader

the complete blaster

thanks for having a look at my nitefinder, i will be sending it to black boarder tomorrow (10/4/12). please let me know what you think of it. unicorn out.

500 Page views

WOO We just hit 500 page views and were very happy When we hit 5000 we might do a give away

TheRoboteer's secondary: Nerf Element overhauled

Hey guys. It's TheRoboteer here. Today i'm going to be showing my personal secondary. It's an Overhauled Nerf Element.

Anyway let's get onto the good stuff

 Two overall shots of the blaster. Looks pretty good huh.

 Internals(Yes the screw ports on the plunger broke off. It was because I used to have an insane spring combo in there(Surge 10+element))

A shot of the single barrel

Mods include:Deadspace removal

                       New spring combo( Surge 10+2 Tek 3 springs)

                       Seal increase

                       Plunger padding

                       Couplered with a 5 inch, 15mm PEX barrel

                       Keyring mod

                       Minimization

                       Paintjob

It hits 70ft. Maybe a little more with streamlines or CDDT's  (modified stock darts)

 

new NERF elite series pictures released!

i was really excited when pictures of the greatly anticipated NERF so called "elite series" came out because they claimed 75' ranges each and they just look really cool in general, so i decided to share them with you all.

the nerf elite logo

the "rampage" a remake of the raider with new 25 dart drum, blast shield and stock design 

the "retaliator"; basically a recon with cooler attachments and of course  all the new internal stuff

the "elite barricade", hmmm, perhaps they couldn't think of a new name for this one more or less exactly the same as it's predecessor but with a new stock capable of storing an extra round of darts.

the "hailfire" a brand new design altogether. nerf claims that this one is the "pinnicle of nerf innovation" let's just hope that their not digging themselves into too much of a hole by saying that! appears to be full auto,  have a built-in 8 clip selector so thats 8x6 which is a grand total of 48 darts! 

thanks for reading this post, let me know what you think. unicorn out.

nerfenstein: australia cosmetic modder and mrmagicalunicorn9 and theroboteer welcome to nerf universal

hey guys I was roaming around the internet one day and I found this Australian girl who does killer Nerf cosmetic mods. her name is Nerfenstein she runs the Blog girlygamer
http://girlygamer.com.au/
here's a picture of her work and check her out

also id like to welcome mrmagicalunicorn9 and theroboteer to Nerf universal. hope they will post great things in the future

hey guys (and girls, i don't wan't my first post to sound sexist) mrmagicalunicorn9 here, you may know me from youtube, foam nation or here. just to let you know that i'm now authoring on this blog thanks to my good friend BBV (blackboarderv) so... yeah, happy nerfing! unicorn out.

Cool Idea for speedloaders

I added some velcro to the speedloader

Then to the blaster

Then i put them together :P

Thanks for reading :BBV:

Hey guys it's TheRoboteer Here!

Hi World! It's TheRoboteer here. I'm a new author here on Nerf Universal. You may already know me from Youtube,Foamnation,Pacific Nerf, Tactical Tag or Nerf mods and reviews. I hope to author quite a few posts here and help the Nerfing community!

-TheRoboteer

How to make a pex speedloader

 A BIG THANKS TO THEROBOTEER WHO TOLD ME HOW TO DO THIS
ALL CREDIT GOES TO HIM

First of all you need a piece of PEX. If you have CPVC you can skip the next steps.  This is just a scrap piece so don't cut it down to this size cut it down to roughly 13cm or 5 inches

 

Then get some scissors and keep turning them around until you get a nice fit for your dart

There are usually 2 rings of pipe you want to widen the inner diameter so that there is only one ring 

 IF YOU HAVE A COUPLER SKIP THIS AND THE NEXT STEP  !

if not then use a knife or scissors to make the outer diameter smaller

Your pipe should fit with a tight seal but if not use a hammer and hit it down

Now make another one and tape/ hot glue them together

 

Thanks for reading :BBV:

sakar nerf toys

hey guys hunter here. you guys heard about the gear that sakar produced for nerf by urban taggers

the products include ,random camera's,mp3 player,and my favorite night vision goggles. i have a video to show you all the products

hey guys hunter here

hey guys hunter here this is my first post on nerf universal. im going to be posting mod guides and nerf news in australia

Hey Guys we have got a new author Hunter1724x hope you like his work :BBV:

Hey guys its longshot here and i just bought my first LONGSHOT! Im so excited and im going to make a mod video once its done. i hope u guys like it!

Mod Exchange Maverick

My goal was to modify a maverick with an integrated LED , here are some pics

My soldered out switch >:( I hate superglue 

The Ghetto Modded Circuit I ripped it out :)

The Circuit being re - built

I should really Tidy My desk

Some of the insides

The Full Internals

The Right Side

Full Barrel Drop

LED!! from the Front

The Left side

Overall I am very pleased with this mod